| Units | PV110c | |
|---|---|---|
| Energy | ||
| Building regulations – seasonal efficiency | (%) gross | 95.8 |
| ErP efficiency rating (modules ≤ 70 kW only) | N/A | |
| Boiler output (non-condensing) mean 70°C – max | kW | 99.8 |
| Boiler output (non-condensing) mean 70°C – min | kW | 33.3 |
| Boiler output (condensing) mean 40°C – max | kW | 110 |
| Boiler output (condensing) mean 40°C – min | kW | 36.37 |
| Gross boiler input – max | kW | 115 |
| Gross boiler input – min | kW | 38.3 |
| Net boiler input – max | kW | 103.5 |
| Net boiler input – min | kW | 34.5 |
| Water | ||
| Water content | litres | 8 |
| System design flow rate @ 20°C ∆T rise | l/s | 1.3 |
| Water side pressure loss @ 20°C ∆T rise | mbar | 72 |
| System design flow rate @ 11°C ∆T rise | l/s | 2.4 |
| Water side pressure loss @ 11°C ∆T rise | mbar | 244 |
| Maximum water pressure | bar g | 6 |
| Gas | ||
| Gas flow rate natural gas (G20) – max | m3/hr | 10.9 |
| Nominal inlet pressure natural gas (G20) – max | mbar | 20 |
| Maximum gas inlet pressure natural gas (G20) | mbar | 25 |
| Flue | ||
| Flue Gas Flow Rate@ 15°C, 9.5% CO2 | m3/hr | 137 |
| Approx. flue gas temperature @ 50/30°C | °C | 45 |
| Approx. flue gas temperature @ 80/60°C | °C | 65 |
| Pressure at boiler flue spigot @full load | Pa | 100 |
| Dry NOx emission* | mg/kWh | 39.1 |
| Connection | ||
| Water flow/return connections | inches | R2” |
| Gas inlet connection pipe thread size | inches | R1” |
| Nominal flue diameter (I/D) | mm | 150 |
| Electrics | ||
| Electrical supply | 230 V 1 Ph 50 Hz | |
| Power consumption @ max | W | 94 |
| IEC power outlet power consumption @ max | W | 460 |
| Start current and run current | Amp | 0.54 |
| Approx shipping weight | kg | 195 |
| Noise emission @1 m and @maximum boiler modulation | Max dB (A) | 53 |
| CO2 (±0.25%) – max | % | 9.5 |
| CO2 (±0.25%) – min | % | 9.5 |
| *0% excess oxygen, dry air free, European Class 6 |
